Heat loss and heating design explained.
Before choosing a heat pump or changing your heating, understand what your home needs—and how the proposed system will meet it.
Tawai Consulting provides independent surveys, room-by-room heat loss calculations and completed heating design. We do not sell equipment or install heating systems. Our role is to help you make an informed decision about your property.
What does a heat loss calculation tell you?
A room-by-room calculation estimates the heating output needed to maintain chosen indoor temperatures when it is cold outside. Heat escapes through walls, windows, doors, roofs and floors, and through ventilation and air leakage. The calculation brings these losses together using the building’s dimensions, construction and design conditions.
The result is a rate of heat loss, expressed in watts (W) or kilowatts (kW). It is not your annual energy consumption in kilowatt-hours (kWh), and it is not a prediction of your electricity bill.
Why the information behind the figure matters
Two homes with the same floor area can have different heating requirements. Insulation, glazing, exposed surfaces, ventilation and the temperatures used all affect the result. For an extension or renovation, the calculation should reflect the proposed finished building.
A survey helps establish the information available. Some construction details may be concealed, so drawings, insulation records and other evidence can be useful. Where information is missing, assumptions should be identified and explained. A calculated heat loss is an estimate based on these inputs, rather than a direct measurement of the building’s performance.
From heat loss to a working heating design
The whole-house figure helps inform heat-source selection, while each room’s result informs its radiator or underfloor heating requirement. A completed design then considers how these parts work together.
- Heat pump selection: assess available heating output at the proposed outdoor and water temperatures, alongside the unit’s operating range. The model name alone does not establish its suitability.
- Radiators: check output at the proposed flow, return and room temperatures. Existing radiators may be suitable; others may need changing.
- Underfloor heating: consider room demand, usable heated floor area, floor construction and coverings, pipe layout and water temperatures.
- Hot water: consider household use, cylinder specification, available space and the proposed heat source. Space-heating heat loss alone does not determine cylinder size.
- Pipework and flow: consider the water flow needed to deliver the heat, pipe sizes, routes and pressure losses within the agreed design scope.
- Practical arrangements: consider equipment locations, access, controls and how the system will be installed and operated.
Lower heating-water temperatures can improve heat pump efficiency, but the emitters must still meet the room requirements. The appropriate design needs to balance performance, practical constraints and the work required.
Why can installer proposals differ?
Different assumptions about construction, ventilation or temperatures can produce different heat loss figures. Proposals may also differ in equipment, emitter changes, hot-water arrangements and the extent of the installation work.
A difference is a reason to ask for an explanation. Ask for the calculation basis, proposed design temperatures, room-by-room emitter schedule and the reasoning behind equipment selection. A design calculation cannot, by itself, guarantee running costs or installation quality.
Survey, design from plans or quotation review?
- A fresh survey and design: useful when you need a property-specific starting point before approaching installers, or when the available information is insufficient.
- Design from plans: useful for new builds, extensions and renovations with suitable drawings and construction specifications. We confirm the information required before starting.
- A quotation review: useful when you already have a proposal and want an independent assessment of the information supplied. We identify concerns, missing details and questions for the installer. It does not replace a fresh survey or calculation where those are needed.
How Tawai can help
Our in-person service includes an approximately two-hour property survey, room-by-room heat loss assessment and a completed heating design within the agreed scope, including ASHP sizing, hot-water cylinder specification and radiator/UFH design where applicable. Heat pumps are our specialism; we also undertake heat loss and emitter design for other wet heating systems.
On-site work covers Suffolk, Norfolk, Essex and Cambridgeshire. Suitable projects can be designed remotely from plans. Send your postcode, a short description of the project and any available plans or quotations so we can confirm the appropriate service and fee.
Written by Tawai Consulting · 2 November 2026 · General information; project-specific scope and recommendations are agreed before work begins.